Previous    Contents     Next

9. User Guide Revisions

13/7/17 - Added Appendix I - Motorised Trim Wheel

15/9/16 - Added Appendix H - Stick Pusher

15/8/16 - Updated Appendix B - added information on the new CL_XOver card for improved electrical linking of dual control stations.

3/2/16 - Added Appendices E & F for integration with Sim Avionics and ProSim 737. Added Appendix G for Failure Mode Loading. Updated software revision and changelog for V1.314.

18/8/15 - Updated all sections to reference the new Configuration Manager software included in release V1.3 of the BFF CL Software.

14/1/15 - Added Appendix D for Heavy Jet mode 1. Added V1.210 link and updated software revisions doc. Added Section 11 Miscellaneous Config Parameters

23/1/14 - Added Appendix C for Helicopter cyclic control loading mode. Added V1.20 link and updated software revisions doc.

7/10/13 - Added additional comments on control movement input to FS when in dual electrically linked mode to Appendix B.

12/9/13 - Added additional comments on FS control movement calibration to Appendix A.

12/6/13 - Added Appendix B - electrical linking of dual control stations.

7/6/13 - Various sections updated to match release of v1.10 software. Added Appendix A - Configuring for "potentiometer-less" operation.

14/1/13 - Various sections updated to match release of v1.07 software. Includes update of Section 7 trim.

20/7/12 - Various sections updated to match first non-beta release of the software.

28/6/12 - vbeta4.91 of the CL software adds support for Lockheed Martin P3D - various additions made to the user guide.

Added information on the configuration file name command line parameter to the Operation section.

10/12/11 - Updated Trim section to explain settings in Pry_S.cfg file for trim input methods.

30/9/11 - First release of on-line version of guide.

Previous    Contents     Next